ET2000

DOWNLOADS

INTRODUCTION

The Ingal Civil ET2000 Plus guardrail extruder terminal has been designed specifically to absorb the kinetic energy of an impacting vehicle at a controlled rate, providing a soft ride-down for vehicle occupants.

Unlike traditional flared guardrail terminals, the ET2000 Plus from Ingal is a tangential end treatment that is installed on a straight alignment. The use of an ET2000 Plus provides an end treatment solution for applications where there is insufficient space for a flared end terminal or when it is cost prohibitive to place an embankment for a flared terminal.

The ET2000 Plus is available to purchase in two sizes. The compact 7.62m TL2 terminal is an economical solution where the posted speed is less than or equal to 70km/h. The standard 15.24 TL3 terminal is acceptable for all posted speeds greater than 70km/h.

SPECIFICATION

Test Level

NCHRP TL2

NCHRP TL3

Overall length

Total Mass

Point of Need

Surface Treatment

Material Grade Beams

Material Grade Posts

7.62m

330kg

15.24m

540kg

Post 3 (3,810mm)

Galvanized to AS/NZS 4680 after fabrication

350MPA

ASTM A36

GET IN CONTACT

One of our sales representatives will be more than happy to help

switch image

call us on